Product Information

Heat Exchangers - Stainless Steel 100,000 btu (1440 GPH Max.)

Product Code: HEAZTXEF40

Heat Exchangers - Stainless Steel 100,000 btu  (1440 GPH Max.)

Heat Exchangers

These Pond Heat Exchangers are the most economical heat exchangers.

Heat Exchanger provides a method of heating water by simply pumping the water.

Water enters through the Inlet Pipe and then circulates past an inner Stainless Steel Coil. The coil contains hot water from the boiler. The heat from the 'Hot Water' in the inner coil never makes contact with the actual pond water but the heat generated from it is then transferred to the water flowing round it by radiation providing heat to your pond.

G M Heat Exchangers are manufactured from quality marine grade Type 316 stainless steel,

Each unit undergoes 12 stringent tests during quality control production.

Each unit is tested to 70 p.s.i before leaving the factory and each one is guaranteed for a full 12 months from purchase date, subject to essential conditions are strictly followed during

the installation and working life.

All units must be installed vertically. Care must be taken to insure that no chemical residue can enter the heat exchanger when the system is not running. It is recommended to maintain a constant pH between 7.2 – 7.6 to prevent excessive scaling deposits and corrosion.

 
BTUs Max Pond Size Max gph Coils
60,000 3,000 gallons 900 Single Coiled
100,000 5,000 gallons 1,440 Single Coiled
130,000 6,500 gallons 1,860 Single Coiled
170,000 8,500 gallons 2,460 Single Coiled
230,000 11,500 gallons 3,300 Single Coiled
460,000 23,000 gallons 8,580 Double Coiled

 

£185.00

 

 

© M2 Koi Ltd - Registered address : 12 Poplicans Road, Cuxton, Rochester, Kent, ME2 1EH. 01634 650111.

Registered in England, Registered number: M2K458. VAT Number: 206973005

Mobile Site

website by bluewasp